Custom Reverb Signature Version 2

The Custom Reverb Signature is the culmination of everything Bill & Joe have learned since day one. It has a lot of the same features from their early days building amplifiers. The CR Sig has a very refined lead channel that has been tweaked to perfection. Originating in the K&M Custom, this circuit is the most open, least compressed and most articulate and revealing. The Signature also features a dual mode power supply which allows for either 35 watt or 50 watt operation(70/100 watts in the 100 watt version). It has a separate isolated power supply for the reverb, which enhances the reverb effect and prevents loading of the dry signal. In conjunction with our other reverb innovations, you'll immediately notice a rounder, warmer, less restrictive feel.

The version 2 of the Custom Reverb Signature features further refinements. More proprietary components have been added to the list of parts made exclusively for us to continually improve our amps. The presence control has been eliminated and a contour control has been added. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The effects return level is now internally fixed and there is a reverb send control on the back, similar to the Overdrive Signature. The beauty of this is you can control the amount of signal that goes to the reverb tank, allowing you to go from short to long decay times. The return control(front panel) adds just the right amount of total effect, from subtle to surf.

Finally, the output transformer has also been redesigned. The Custom Reverb Signature V2 has a much wider bandwidth, which along with our refined circuitry and component choices, translates into more articulation, feel, chime, and musicality than ever before.

Quick Facts:

• 2 channel, cascading, SS Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
• 4, 8, 16 ohm output, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel, contour control.
• Dual function LED footswitch for clean/lead and tone bypass.
• Accutronics all tube spring reverb with send and return controls.
• Buffered effects loop.
• Special design transformers, individually selected components, each amp signed by Bill Krinard and Joe Mloganoski personally.
• Dimensions: 20" L x 10" D x 12" H / Weight: 41 Lbs for 50 watt and 49 Lbs for 100 watt.
• Price: $5000 at 50watts / $5500 at 100watts. Standard cabinet is black tolex. Custom covering available at additional cost.

Customer Reviews:

I remember the first time I plugged into my new C.R. Signature V.2 and heard the notes emerge from the 1-12 cabinet I had at the time. It was as if a
muzzle had been removed from the sound coming out of the speakers! I could hear the notes bloom, one by one, as they emerged from the cabinet. I heard
each string sing with crystal clear definition. The highs sizzled and the lows punched through with authority. It took less than 5 seconds to realize
that I FINALLY heard the sound that I wanted to hear in terms of tone. It took decades to find this amp and it will need to be pried from my cold dead
hands before I ever let it go. Suffice it to say I have played through hundreds of amps over the years, and own many of the "world's best"
amps, as determined by the experts, but NONE of them are as versatile and toneful as this amp. Buy one and you can be done searching for tone. It
lives here.